Silvercrest SOR 2450 A1 User Manual download pdf (Page 10)

SilverCrest SOR 2450 A1

8 - English

 Once the desired room temperature is reached, turn the thermostat [2] slowly to the left until the

indicator light

in the heat level switch goes out. The current room temperature is then

maintained. The oil-filled radiator heats up again once the room temperature drops below the

set temperature. This is indicated by the indicator light in the heat level switch lighting up at this

time.

Set the fan heater switch [5] to the fan symbol to turn on the fan heater. Additional warm air is

then emitted from the fan heater outlet [7]. You can thus heat up the room even faster. The

indicator light in the fan heater switch [5] lights up once it heats. The fan heater is also

regulated via the thermostat [2].

 If you want to switch off the oil-filled radiator, set the heat level switch I [3], the heat level

switch II [4] and the fan heater switch [5] to the position "0". Turn the thermostat [2] as far as

possible to the left.

 Remove the mains plug from the socket and wind the cable around the mains cable winder [8].

Frost protection function

The frost protection function of the oil-filled radiator ensures that the room temperature does not

drop below approx. 6°C. For this purpose, set the oil-filled radiator as follows:

 Turn the thermostat [2] as far as possible to the left.

 Set the heat level switch I [3], the heat level switch II [4] and the fan heater switch [5] to the

position "0".

 Insert the mains plug into a mains socket that is always easily accessible.

 Then set the heat level switch I [3] and/or the heat level switch II [4] to the position "I" or "II".

If the room temperature then drops below approx. 6°C, the oil-filled radiator switches on

automatically and heats. If the room temperature rises above approx. 6°C, the oil-filled radiator is

switched off automatically. While the oil-filled radiator heats, the indicator light of the activated heat

level switch lights up.

Troubleshooting

The oil-filled radiator is not working.

 Check whether the mains plug is inserted correctly in the mains socket.

 Check whether the heat level switch I [3] and/or the heat level switch II [4] are set to the

position "I" or the fan heater switch [5] is set to the fan symbol.

 Check the position of the thermostat [2] and turn the thermostat [2] as far as possible to the

right if necessary.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

No comments

Silvercrest SOR 2450 A1 User Manual Page 10