Section 3
Maintenance
85
No-Start Troubleshooting
Step 10
Attempt to bump the engine with the starter. DO
NOT ATTEMPT TO START THE ENGINE, JUST
BUMP IT.
Does the starter engage?
앫
NO ➞ GO TO STEP 11.
앫 YES ➞ THE ISSUE WAS A CONTAMINATED
OEM INTERFACE CONNECTOR, J7.
4004152a
Step 11
Disconnect the neutral switch connector, J2.
Step 12
Verify that the neutral switch connector, J2, and
the neutral switch are clean and that all pins are
firmly held in place.
Use contact cleaner as necessary.
Do any of the pins show signs of damage?
앫
NO ➞ GO TO STEP 13.
앫 YES ➞ REPLACE THE TRANSMISSION WIRING
HARNESS AND/OR THE NEUTRAL SWITCH AS
NECESSARY.
Comments to this Manuals