Silvercrest SKAS 1000 A16 Specifications download pdf (Page 117)

Section 5

Removal and Installation

108

Step 21

Use a 22 mm wrench to remove the fill plug

from the transmission. Check that the oil is even

with the bottom of the fill plug hole.

If necessary, add an approved full-synthetic

oil through the fill plug hole until the oil is even

with the bottom of the fill plug hole.

Manually position the fill plug and install it into

the transmission by hand. Hand tighten the plug,

and then use a torque wrench to tighten the fill

plug to 44 lb-ft (60 N•m). Do not overtighten the

plug. Start the engine and run it for 30 seconds.

Use a 22 mm wrench to remove the fill plug.

Check the oil level. Add oil as necessary.

앫

GO TO THE NEXT STEP.

Step 22

WARNING

When you install a fill plug and a drain plug into

a transmission, first manually position the plug,

and then install and tighten it by hand. When

you’ve hand tightened the plug, use a torque

wrench to tighten it to 44 lb-ft (60 N•m). Do not

overtighten the plug. Damage to the aluminum

housing can result.

Manually position the fill plug and install it into

the transmission by hand. Hand tighten the

plug, and then use a torque wrench to tighten

the plug to 44 lb-ft (60 N•m). Do not overtighten

the fill plug.

앫

GO TO THE NEXT STEP.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 191 192

No comments

Silvercrest SKAS 1000 A16 Specifications Page 117