search

Silvercrest SKAS 1000 A16 Specifications Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 39
Section 2
Fault Code Diagnostics
31
40 28 Open circuit at the output stage to the
low range solenoid (Y8)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
41 29 Open circuit at the output stage to the
high range solenoid (Y9)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
42 2A Open circuit at the output stage to the
main solenoid (Y1)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
49 31 Open circuit at the output stage to the
inertia brake solenoid (Y1)
When submitting a warranty claim under standard
warranty conditions, the complete TCU should be
replaced and the entire unit submitted with warranty
claim.
Out-of-warranty only and/or no warranty claim
submitted, replace lower part of TCU.
Contact OnTrac at 866-668-7221 and request a
ZF-FreedomLine transmission specialist.
50 32 Open circuit at output stage to small
disengagement clutch valve
Additional fault codes 51/52/53 also active, verify
connection of clutch actuator connector to TCU. Measure
the resistance between pin 9 and pin 16 of clutch
actuator connector.
Nominal value should be 14-16 ohms.
If resistance is < 14 ohms, exchange clutch actuator.
If resistance is within correct range, exchange upper part
of TCU.
51 33 Open circuit at output stage to small
engagement clutch valve
Additional fault codes 51/52/53 also active, verify
connection of clutch actuator connector to TCU. Measure
the resistance between pin 7 and pin 16 of clutch
actuator connector.
Nominal value should be 14-16 ohms.
If resistance is < 14 ohms, exchange clutch actuator.
If resistance is within correct range, exchange upper part
of TCU.
ISO Fault Code Diagnostics
NOTE: ISO display codes may not be available on vehicles built prior to January 2006.
ISO Fault
Identifier
ISO Display
Fault Codes
(J587 Display) Fault Description
Repair Instructions
NOTE: The following repair instructions pertain to
active faults only. For information and instructions
about inactive faults, please contact OnTrac at
866-668-7221 and request a transmission
specialist.
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 191 192

Comments to this Manuals

No comments
Related products and manuals for Coffee makers Silvercrest SKAS 1000 A16
Coffee makers Silvercrest SEM 1100 A2 User Manual   (70 pages)
  • Philips-magnavox Esport Sonic Blue Extra SAFARI
  • AEG Cooker hoods Maytag Portable DVD/Blu-Ray players Rover Lawnmowers Skil Unknown Lenovo Uninterruptible power supplies (UPSs)
  • Metal-sales Classic Rib Installation HP Ink Tank Wireless 419 Acer G276HL Whirlpool FWL71052W EU LG 20LC1RB
  • Electrolux EDC2086PDW User Manual Exposure 3010s2 User Manual Samsung GT-I9152 User Manual Sharp AR-5127 Service Manual