Silvercrest SKAS 1000 A16 Specifications download pdf (Page 138)

Section 5

Removal and Installation

129

Step 1

Installation

Coat the outer circumference of the shaft

sealing ring with grease. Use an appropriate

driver to press the sealing ring into the output

cover and ensure it is firmly seated. Slightly

grease the sealing lip.

앫

GO TO THE NEXT STEP.

Step 2

Coat the sealing surface of the output cover

with Loctite

574 or equivalent sealant.

앫

GO TO THE NEXT STEP.

Step 3

NOTE: The sealing surfaces must be clean and

free of oil and grease.

Fit the output cover with a shim, if necessary.

앫

GO TO THE NEXT STEP.

Step 4

Place the output cover in position and secure it

with the 10 M10 hex-head screws. Tighten the

screws to 34 lb-ft (46 N폷m).

4007231b

SHIM

OUTPUT

COVER

SHAFT

SEALING

RING

HEX-HEAD

SCREW

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 191 192

No comments

Silvercrest SKAS 1000 A16 Specifications Page 138