Silvercrest SON 90 A1 Operations Instructions download pdf (Page 142)

Sewing corners

Outer corners

1. Cut away, before and after the corner, about 2 cm to the seam line

(Fig. 97).

2. Sew a stitch further than to the marking "A" on the drawing and then

stop (Fig. 97).

3. Lift the needle and sewing foot a.

4. Pull the fabric to the rear, such that the yarn being held by the finger of

the stitch plate e is released. (For better recognition, on the drawing

opposite the sewing foot a is not shown - Figure 98).

5. Rotate the workpiece and lower the sewing foot a so that the upper

blade i lies in a line with the cutting edge (Fig. 99).

6. Pull the loose threads up and continue to sew.

Inner corners

1. Cut the fabric away from the seam edge.

2. Adjust the upper blade i into the rest position (Fig. 100).

3. Sew on the cutting edge (Fig. 101).

4. Stop sewing just before reaching the corner.

5. Place a fold on the corner, so that the two edges form a line (Fig. 102).

6. Sew slowly over the corner and along the second edge. Ensure that you do

not include the fold!

Cutting line

Fig. 97

Fig. 99

Fig. 98

Fig. 100

Fig. 101

Fig. 102

- 140 -

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 181 182

No comments

Silvercrest SON 90 A1 Operations Instructions Page 142