Silvercrest TWINTALKER 4810 User Manual download pdf (Page 14)

14 Twintalker 4810

Twintalker 4810

13.10 Channel Scan

Channel scan performs searches for active signals in an endless loop from channel 1 to 8.

Once an active channel is found you have the option to search for the CTCSS code or the

DCS code that is set by the user who is broadcasting on the channel.

13.10.1 Scanning for an active radio channel

Once an active channel is found, the scanning will stop and you can listen to the

transmission.

When the transmission on the found channel stops, the scanning will resume automatically.

13.10.2 Scanning for a CTCSS code

When an active channel is found press the PTT button to select the found active channel.

Now you have to option to search for the CTCSS/DCS code that is used by the found user.

Once there is a transmission on the channel, the CTCSS code (if used) will be detected and

displayed.

• Press the -button five times : "SC" and the current

channel flashes on the display.

• Press the -button or the -button to start the

channel scan.

• Press the -button six times : "SC" and "CTCSS 00"

flashes on the display for the selected radio channel.

• Press the -button or the -button to start the

CTCSS scan.

If you press the PTT button while listening to a found channel, the

PMR will go back in stand-by mode on the found channel.

• If you press the PTT button while listening to a found CTCSS

code, the PMR will go back in stand-by mode on the channel with

the CTCSS code.

• If no CTCSS code is detected there is a chance that DCS is

selected by the user. In this case you can scan for the DCS code.

(section 13.10.3)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 147 148

No comments

Silvercrest TWINTALKER 4810 User Manual Page 14