Silvercrest SDM 1000 A1 User Manual download pdf (Page 60)

Donut Maker SDM 1000 A1

58 - English

Never make a knot in the power cable and do not together with other cables. The

power cable should be positioned so nobody can step on or be hindered by it.

Ensure the power cable does not touch hot surfaces of the Donut Maker (A).

Do not use adapter plugs or extension cables which do not meet the applicable safety

standards and do not manipulate the power cable! If the power cable is damaged it

must be replaced by the manufacturer or his customer service, or a similarly qualified

person to prevent hazards.

All contents of these instructions are subject to copyright and are solely made available to the

reader for information purposes. Any copying or duplication of data and information without the

express written approval of the author is prohibited. This also pertains to the commercial use of the

contents and data. Text and illustrations are current at the time of print. Subject to change.

Before use

Remove the Donut Maker (A) from the packaging and remove all packaging materials. Check the

Donut Maker (A) for damage. Do not use the Donut Maker (A) if damaged.

Clean the Donut Maker (A) as described in chapter "Cleaning". Lightly grease the baking surfaces

(6) with butter, margarine or oil suitable for baking. This will make it easier for any manufacturing

residue on the baking surfaces (6) to release. Now plug the power plug into a power socket and

the Donut Maker (A) with the cover (3) once until the green indicator light (2) shows the baking

temperature has been reached.

Risk of burns! The temperature of accessible surfaces can be very high whilst baking.

A slight odour and even minimal smoke may form during first use due to manufacturing

residue. This is normal and will disappear after a short time. Please ensure adequate

ventilation. If necessary, open a window.

Now unplug from the power outlet and allow the Donut Maker (A) to cool off with the lid (3) open.

Next clean the Donut Maker (A) again as described in chapter "Cleaning".

The Donut Maker (A) is now ready for use.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 69 70

No comments

Silvercrest SDM 1000 A1 User Manual Page 60