Silvercrest ASPIRADOR DE MANO CON BATERÍA DE IONES DE LITIO MI User Manual download pdf (Page 37)

- 34 -

2. Select a suitable installation location for the wall

holder 3: It should present no problem with

taking the hand vacuum cleaner out of it and a

mains power socket for the power adapter 4

must be accessible.

3. Bore two holes with a spacing of approx. 68 mm.

Use the wall holder 3 to mark the boreholes:

this will ensure the spacing is correct. The bore-

holes must be suitable for 5 mm wallplugs.

4. Insert the wallplugs into the boreholes and, using the

screws, firmly screw the wall holder 3 to the wall.

5. You can place the nozzles on the lateral acces-

sories holder.

6. Connect the power adapter 4 to a mains power

socket.

Charging

Note:

Check to ensure that the on/off switch 6 has been

slid back (to the position "0") before starting the

charging process.

• Place the hand vacuum cleaner from above into

the wall holder 3, so that the barrel plug 5

slips into the socket on the hand vacuum cleaner.

The charge indicator lamp 7 flashes red and

the charging process begins.

Important:

• When the hand vacuum again has enough ener-

gy to vacuum, the charge indicator lamp 7

glows green. This does not mean that the batte-

ries are fully charged. When the charge indica-

tor lamp 7 glows green, it means the batteries

are charged to about 80%.

• When charging is complete, which with fully

discharged batteries can take approx. 5 hours,

the appliance automatically switches to a trickle

charge (maintenance function). Nevertheless, in

order to avoid possible damage to the batteries,

do not leave the appliance permanently con-

nected to the power adapter 4.

• First recharge the batteries when the suction

power of the hand vacuum cleaner is noticeably

weaker and the charge indicator lamp 7 green

is blinking.

Note:

The hand vacuum cleaner can also be charged

directly via the power adapter 4. For this, remove

the barrel plug 5 with a slight twist from the wall

holder 3 and insert it into the socket on the hand

vacuum cleaner.

Operation

Warning!

The suction opening must always be open and

unblocked. Blockages lead to overheating and da-

mage to the motor.

Tips:

• Make certain that the dust filter 0 is always

inserted before using the appliance.

• As the maximum, suck up only as much liquid as

will fill the dirt container q to the MAX mark.

1. Take the hand vacuum cleaner from the wall hol-

der 3 or, if you do not use the wall holder 3,

remove the barrel plug 5 from the socket.

2. If required, place the appropriate nozzle into the

suction opening:

• the crevice nozzle 2, to clean narrow and

difficult to reach locations.

• the wet suction nozzle 1 to vacuum liquids up.

IB_109560_SAS7.4LIA2_LB5.qxp 08.12.2014 10:49 Uhr Seite 34

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

Comments to this Manuals

No comments

Silvercrest ASPIRADOR DE MANO CON BATERÍA DE IONES DE LITIO MI User Manual Page 37

Comments to this Manuals

Related products and manuals for Vacuums Silvercrest ASPIRADOR DE MANO CON BATERÍA DE IONES DE LITIO MI