Portable USB Charger SSB 1.0 A1
Operating and Safety Instructions
V 1.5
IAN 70999
Before you use this device for the first time
please read and follow these instructions, even if
you are familiar with handling electronic devices!
Keep the instructions and pass them on with the
device if applicable.
In the following, this symbol indicates risks which
could result in personal injury or damage.
Package Contents
Portable USB charger SilverCrest SSB 1.0 A1
User's Manual
Safety Instructions
Intended Use
The portable USB charger SSB 1.0 A1 is intended to
be used exclusively to charge devices with a USB
charger receptacle. Any use other than that mentioned
above does not correspond to the intended use.
The manufacturer accepts no liability if:
the portable USB charger is not used in accordance
with the intended use;
the portable USB charger is damaged or operated
when incomplete or modified;
devices are connected which cannot be charged via
USB. Check the documentation for the device you
wish to connect.
This is an information technology device. It may only be
used for private purposes, not for industrial or
commercial purposes.
General safety instructions
Electrical devices should not be operated by children
or people with mental or physical disabilities. Do not
allow these people to use electrical devices when not
under supervision. They may not understand that
they can be dangerous.
Small parts can represent choking hazards. Please
also note that there is a risk of suffocation if airways
are blocked by the packaging film.
If smoke, unusual noises or smells are noticed,
disconnect all cables immediately.
If this occurs the device should no longer be used
and should be inspected by authorized service
personnel.
Operational safety
Do not connect devices which contain batteries to
the portable USB charger, as these can explode
during the charging process.
Do not use an adapter plug or extension cable which
is damaged or that does not meet the required safety
standards.
To disconnect a cable, hold the portable USB
charger and pull on the plug, not the cable. Make
sure that the cable is not kinked and is not in
anyone's way.
If the portable USB charger is exposed to broad
temperature fluctuations condensation can form and
cause moisture which can produce a short circuit. If
this occurs, use the portable USB charger only after
it has reached the ambient temperature.
Operating Environment/Environmental
Conditions
Keep the portable USB charger away from moisture.
Do not place any recipients containing liquids
(beverages, vases, etc.) next to the device. Avoid
vibrations, dust, heat and direct sunlight, otherwise
the device may be damaged.
Controls and Display Elements
Fully charge your portable USB charger before
using it for the first time. During the charging
process, no devices must be connected to the USB
socket [2].
Pos.
Function, controls
1
POWER button. Keep this button pressed for at least
5 seconds to start the charging process for the
connected device. Charging of the connected device
will continue until the portable USB charger’s battery
is empty or until the charging current to the
connected device stops flowing.
2 Charging LED (visible when illuminated only).
3
USB socket. Connect the USB cable of the device
you wish to charge here.
4
USB plug. Insert this plug into a USB socket (for
instance a USB charger adapter or a computer) in
order to charge the portable USB charger’s battery.
The charging indicator [2] will light during charging.
As soon as the charging indicator [2] stops lighting,
the charging process is completed.
Cleaning and care
Disconnect the portable USB charger from the
USB socket and unplug all connected devices prior
to cleaning otherwise your life is in danger due
to electric shock.
Furthermore, there is a risk of a short circuit causing
damage to the portable USB charger and the
connected device.
If dirty, clean the device with a dry cloth or use a
slightly damp cloth for stubborn dirt. Do not use any
solvents, irritants or gaseous cleaners. No moisture
must penetrate into the adapter.
When not using the portable USB charger for a long
time, recharge the built-in battery every 3 months in
order to maintain battery performance.
Disposal of Old Devices
The product bears the symbol of a rubbish bin
crossed out. The European Directive
2002/96/EC therefore applies.
All electrical and electronic devices must be disposed
of separately from household waste at official disposal
centres. For further information, contact your local
government, disposal bodies or the shop where you
bought the device.
The built-in rechargeable battery cannot be removed
for disposal.
Legal Requirements
The portable USB charger fulfils all conformity-
relevant norms and standards. Any modifications to
the portable USB charger may result in these
directives no longer being met.
If you are not using the portable USB charger within
the Republic of Germany, you must observe the
regulations and laws in the country of use.
Manufacturer: TARGA GmbH, Postfach 2244, D-
59482 Soest, Germany
Conformity Notice
The portable USB charger complies with the basic and
other relevant requirements of the EMC Directive
2004/108/EC.
(6 pages)
(34 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals