Silvercrest SWKS 2400 D1 User Manual download pdf (Page 46)

SWKS 2400 D1

Initial use

WARNING - RISK OF INJURY!

► Always and only use freshly drawn mains water in the kettle! Do not con-

sume an

y water that is not certiﬁ ed as potable. If you do, you are taking a

risk with your health!

Before starting the appliance up, make certain that ...

– the appliance, plug and power cable are in a serviceable condition

and ...

– all packaging materials have been removed from the appliance.

Open the lid by pressing on the release button 1.

2) Fill the appliance with water up to the MAX marking and let it come to a

full boil once – as described in the next section.

3) After it has boiled, pour this water away.

4) Rinse the kettle out with clear water.

5) Fill the appliance with water once again, up to the MAX marking, and

then bring it to boil. When done, pour this water away also.

6) Rinse the kettle out with clear water.

The appliance is now ready for use.

Boiling water

RISK - ELECTRICAL SHOCK!

► Never place the electrical base 4 close to w

ater – this would be a

potentially fatal risk!

WARNING - RISK OF INJURY!

► Always use freshly drawn water. Do not consume any water that has already

stood in the k

ettle for longer than one hour. Do not reboil water that has cooled

down. Always pour old water away. Microbes could have formed in it!

NOTE

► Always ensure that the ON/OFF switch 3 is turned to “0” when the mains

plug is unplugged and the de

vice is standing on the base 4.

If not, the device could heat up unintendedly as soon as the mains plug is

plugged in again.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 63 64

No comments

Silvercrest SWKS 2400 D1 User Manual Page 46