Silvercrest SDRB 1000 B1 User Manual download pdf (Page 11)

- 8 -

Ironing function

• Dismantle the brush attachment w from the

appliance (see “Attaching/detaching the brush

attachment”).

• Connect the appliance to a correctly installed

and earthed mains power socket.

• Adjust the temperature regulator 3 as per the

international point symbols (Care Label) or the

type of material. The heating-up control lamp 5

glows. As soon as the set temperature has been re-

ached, the heating-up control lamp 5 goes out .

Note:

If doubt exists, start with a low temperature and

gradually increase it to a higher one. With sensitive

materials we recommend carrying out an ironing

test at a concealed part (inside seam).

• For heavily creased laundry, you can use the steam

function by pressing the steam blast button 8. To

generate the steam, the temperature regula-tor 3

must be set to at least ••• or higher.

• Should the heating-up control lamp 5 glow during

the process, release the steam blast button 8

and wait for a few moments until the heating-up

control lamp 5 extinguishes.

Washing label Type of

material

Temperature

regulator 3

Chemical fibres,

e.g. viscose,

polyester

•

(low

temperature)

Silk, Wool

••

(medium

temperature)

Cotton, Linen

•••

(high

temperature)

• You can repeatedly press the steam blast button 8

until the heating-up control lamp 5 glows or

water drips from the sole of the iron 0. Then, wait

until the heating-up control lamp 5 extinguishes

before activating a further blast of steam.

Note:

Should you press the steam blast button 8 whilst

the heating-up control lamp 5 is glowing the result

will be condensed water instead of steam, and water

will drip from the sole of the iron 0.

Should the water tank 1 become empty while the

appliance is in use, remove the plug 7 from the

power socket before refilling it.

• If you want to put the appliance down during

use, fold out the stands 9 to the front and place

the appliance on them. When you are ready to

reuse the appliance, simply fold the stands 9

back to the rear.

After using the steam brush

• Place the temperature regulator 3 at the

position "MIN".

• After use, ALWAYS remove the plug 7 from the

power socket.

• Pour away any water remaining in the water

tank 1 to do this, open, the water fill opening 2

of the water tank 1, turn the appliance upside

down and lightly swivel it.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Comments to this Manuals

No comments

Silvercrest SDRB 1000 B1 User Manual Page 11

Comments to this Manuals

Related products and manuals for Irons Silvercrest SDRB 1000 B1