Silvercrest SEM 1100 A2 User Manual download pdf (Page 77)

SEM 1100 A2

Cleaning the hot water shower

Clean the hot water shower t after each use:

1) After you have prepared the espresso/cappuccino and removed the sieve

holder w, wipe the entire surface of the hot water shower t with a moist

cloth so that all powder residues are removed.

2) Insert the ﬁ lter holder w back in without the espresso ﬁ lters 0 q.

3) Then place an empty cup under the hot water spray t and turn the rotary

function switch 5 to the position “

“. Water ﬂ ows from the hot water spray

t and rinses the last of the powder residue out.

4) After about 20 seconds place the rotary function switch 5 back to the positi-

on “

“ and then switch the appliance oﬀ with the On/Oﬀ switch 3.

5) Take the ﬁ lter holder w back oﬀ .

Cleaning accessories

1) Clean the ﬁ lter holder w, the two coﬀ ee ﬁ lters 0 q, the water tank 1, the

measuring scoop 9 and the drip tray 8 in warm water.

NOTICE

► If you put detergent into the water, it may have a negative eﬀ ect on the taste

of the espresso. If the stains can only be remo

ved with detergent, always

rinse the items afterwards with lots of clean water.

2) Dry all parts well.

3) The drip tray r is suitable for cleaning in the dishwasher.

Cleaning the appliance

Clean the housing with a moist cloth. If necessary, use a little detergent on the

cloth.

Descaling the appliance

Regularly descale the appliance. The appliance should be descaled after about

200 espresso preparations. Depending on the hardness of the water in your area,

this ﬁ gure may diﬀ er.

For descaling, use commercial available descaler for espresso machines. Proceed

as described in the instructions for usage of the descaler.

If you do not have a descaler, you can proceed as follows:

1) Fill the water tank 1 to the marking MAX.

1 2 ... 72 73 74 75 76 77 78 79 80 81

No comments

Silvercrest SEM 1100 A2 User Manual Page 77