Silvercrest SFR 3.7 A2 User Manual download pdf (Page 40)

37

SFR 3.7 A2

GB

MT

NOTE

► Only recharge the batteries when the suction

po

wer of the appliance is noticeably weaker

and the red indicator light 8 is ﬂ ashing red.

Information about the battery

■ For care of the batteries, we recommend the

following: As soon as the batteries are charged,

disconnect the charger t from the mains. Do

not plug the charger t into the mains until the

appliance’s suction power has become notice-

ably weaker.

■ Never continue working until the batteries are

completely discharged and the appliance no

longer works. This can reduce the operating

life of the batteries.

Cleaning and care

DANGER – ELECTRIC SHOCK!

► Prior to cleaning, disconnect the appliance

fr

om the charger t! Risk of electric shock!

ATTENTION! DAMAGE TO PROPERTY!

► Do not use abrasive or aggressive cleaning

mater

ials. These could damage the surface

of the appliance!

Cleaning the spray bottle

■ Open the spray bottle and empty contents.

Remove the microﬁ bre cover z.

Wipe the components of the spray bottle with

a damp cloth; if necessary, use a little mild deter-

gent on the cloth.

The microﬁ bre cover z can be machine-washed

at 60°C. Do not use any fabric conditioner as

this signiﬁ cantly reduces the cleaning power of

the microﬁ bres.

Cleaning the appliance

For thorough cleaning, disassemble the appliance.

1) Pull the vacuum attachment 1 from the con-

necting piece 2. Clean the vacuum attach-

ment 1 with a damp cloth. If required, use

some mild detergent on the cloth.

2) Press the release buttons 3 and at the same

time pull the connecting piece 2 from the

motor unit 7. Clean the connecting piece 2

with a damp cloth. If required, use some mild

detergent on the cloth.

3) Remove the dirt container 5 from the motor

unit 7.

Turn the blue nozzle 4 at the top end of the

dirt container 5 slightly anticlockwise and lift it

oﬀ . Now you can pull the blue rod downwards

out of the dirt container 5. Rinse the dirt con-

tainer 5 with clear water and, if necessary,

with a mild detergent.

4) Wipe the motor block 7 oﬀ with a damp cloth.

If required, use some mild detergent on the

cloth. Dry the motor unit.

5) Then reassemble the appliance.

– Put the blue rod back into the dirt container 5

and ﬁ x it into place with the nozzle 4.

Make sure that the washers are correctly

placed.

– Place the dirt container 5 onto the motor

unit 7.

– Push the connecting piece 2 onto the motor

unit 7/the dir

t container 5, so that it clicks

into place.

– Push the vacuum attachment 1 onto the

connecting piece 2.

■ Wipe the charger t with a damp cloth. Ensur

e

that the charger t is completely dry before

reconnecting it to the mains.

Storage

■ Store the cleaned appliance in a clean, dust-free

and dry location.

1 ... 39 40 41 ... 54

Comments to this Manuals

No comments