GB
31
STW 32 - 60" A1
♦ Drill holes at the marked positions with a diameter of 10 mm and a depth of
at least 60 mm.
60 mm
10 mm
♦ Insert the wall plugs
G
into the holes. Screw the wall bracket to the wall
using the supplied screws
H
and the washers
F
.
If the wall bracket is not absolutely straight after mounting on the wall, you can
correct the tilt to a certain extent.
♦ Undo the four screws of the mounting plate a little bit using an open-ended
spanner (SW 13).
♦ Align the cross member with the aid of the spirit level and then retighten the
four screws of the mounting plate.
G
H
F
IB_106956_STW32-60A1_LB2.indb 31 04.12.14 09:52
Comments to this Manuals