Silvercrest STW 32 - 60 A1 User Manual download pdf (Page 32)

STW 32 - 60" A1

Assembly steps

Step 1: Attaching the mounting rails

♦ Check whether the supplied screws (

) ﬁ t in the prepared holes

on the back of your TV set. If this is not the case, please use other suitable

screws and washers.

♦ Attach the mounting rail so that the screw heads for adjusting the tilt angle

face outwards and the hooks are facing downward. Screw the mounting rail

tight using the suitable screws (

) and washers

so that they

run parallel and are aligned at the same height.

♦ For TV sets with a ﬂ at back, no spacers

are usually required. Fasten the

mounting rails with the appropriate screws and washers directly onto the

rear panel of the device.

♦ For TV sets with a curved rear panel, it may be necessary to use the supplied

spacers

between the TV set and the mounting rail.

Step 2: Attaching the wall bracket to the wall

♦ Start by selecting a suitable mounting height. The ideal height for a TV set is

parallel to the eye-level of a seated person.

♦ Hold the wall bracket up to the to the desired position on the wall to use

as a template and align it with the aid of a spirit level. Mark the 4 holes

with a pencil.

A B C

IB_106956_STW32-60A1_LB2.indb 30 04.12.14 09:52

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

No comments

Silvercrest STW 32 - 60 A1 User Manual Page 32