Silvercrest SZP 25 B1 User Manual download pdf (Page 31)

29

GB

3. Items supplied

1Lid1

1 Large juicer cone2

1 Small juicer cone3

1 Upper screen4 and 1 bottom screen5

(assembled)

1 Juice container7

1Base10

1 Set of operating instructions

4. How to use

• Remove all packing material.

• Check to ensure that all parts are

present and undamaged.

• Clean the device prior to its first

use (see “Cleaning” on page 30)!

5. Operation

5.1 Assembling the citrus

press

DANGER!

Only plug the mains plug9 into the

wall socket after the device has

been completely assembled.

1. Uncoil the power cable9 from the ca-

ble wrap11 to the desired length.

2. Place the base10 on a dry, solid and

level surface.

3. Figure C: place the juice container7

on the base10 with the handle above

the arrow and turn it clockwise until it

locks into place.

4. Figure D: place the upper screen4 on

the bottom screen5 so that the screen

opener6 sticks through the opening,

and the screens lock into place.

5. Place the assembled screen4/5 on the

juice container7 so that the handles fit

perfectly one on top of the other.

6. Place the small juicer cone3 on the drive

axle8. In the process, the small juicer

cone3 must lock into the screen4/5.

For large citrus fruits (e. g. oranges,

grapefruit) place the large juicer cone2

on the small juicer cone3 so that the

wings of the small juicer cone3 fit into

the recesses of the large juicer cone2.

7. Insert the mains plug9 into a wall sock-

et corresponding to the technical data.

5.2 Extracting the juice from

citrus fruits

WARNING!

• Ensure that no foreign body is on the

screen4/5 or in the device when oper-

ating it.

• Do not put excessive pressure on the

juicer cone2/3.

NOTE:

• Empty the juice container7 no later

than when filled to the 600 ml mark.

• In order to achieve the largest juice

yield possible, the juicer cone changes

the direction of rotation after several

starts and stops.

Setting the pulp content

Figure E: using the screen opener6, you

can influence the pulp content of the juice:

• High pulp content: Set the screen opener

6

to the large dot marks so that the openings

in the screen

4

/

5

are open wide.

• Low pulp content: Set the screen open-

er6 to the small dot marks so that the

openings in the screen4/5 are closed.

1. Cut the citrus fruits in half.

2. Exert slight pressure on the halves of the

citrus fruit when pushing the cut surface

down onto the juicer cone

2

/

3

. The

juicer cone

2

/

3

starts turning, and the

juice flows into the juice container

7

.

__RP77146_B2.book Seite 29 Freitag, 21. September 2012 2:10 14

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Comments to this Manuals

No comments