Silvercrest SMRP 450 B1 User Manual download pdf (Page 24)

21

SMRP 450 B1

GB

Assembly and setting up

WARNING! RISK OF FIRE!

► Never place the appliance underneath wall

cupboards or next to curtains, cupboard

walls or other ﬂ ammable objects.

► Always place the appliance on a heat-resistant

surface.

1) Remove all of the parts from the box and

remove the packaging material and any

protective ﬁ lm.

2) Clean all of the components as described in

the Chapter "Cleaning and care" to remove

any packaging residue. Ensure that all parts

are completely dry.

3) Place the appliance on a clean and level heat-

resistant surface. Ensure that you do not place

the appliance directly next to a wall or a cup-

board.

Each person should have unimpaired access to

one of the pans 4.

4) Place the griddle 1 on the base unit so that

the griddle 1 is ﬁ rmly in place.

5) Slide the pans 4 into the appliance.

6) Insert the plug into a mains power socket.

Before ﬁ rst use

1) Slide the pans 4 into the appliance.

2) Grease the griddle 1 lightly with fat or oil

which is suitable for baking/grilling. This makes

it easier to remove any cooking residue on the

griddle 1.

3) Move the ON/OFF switch 2 to "I" and let the

appliance to heat up for 5 minutes.

4) After 5 minutes, move the ON/OFF switch 2

back to "O".

5) Then disconnect the plug and allow the

appliance to cool down.

NOTE

►

The ﬁ rst time the appliance heats up, a small

amount of smoke and odour may be gener-

ated due to production-related residue. This

is completely normal and is completely harm-

less. Provide suﬃ cient ventilation by opening

a window, for example.

6) Clean the griddle 1 as described in Chapter

"Cleaning and Care".

7) Clean the pans 4 as described in Chapter

"Cleaning and Care".

8) Ensure that all parts are completely dry before

operating the appliance.

The appliance is now ready for use.

Operation

Raclette

1) Lightly oil the inside of the pans 4 and top of

the griddle 1.

2) Insert the plug into a mains power socket.

3) Move the ON/OFF switch 2 to "I". The

integrated control lamp on the ON/OFF switch

2 lights up. Let the appliance heat up for

about 10 minutes. The pans 4 not need to be

inserted into the appliance to heat them up.

4) Fill the pans 4 with the desired ingredients.

Ensure that the pans 4 are not overﬁ lled,

otherwise the food could get too close to the

heating element 3 or even touch it!

5) Place the pans 4 into the appliance. The slight

recess in the appliance helps to keep the pans

in place.

6) Remove the pans 4 from the appliance as

soon as the contents are cooked.

WARNING! RISK OF INJURY!

► Apart from the insulated handles, the pans 4

are extremely hot! The pans 4 must therefore

only be held by the handle!

IB_103433_SMRP450B1_LB2.indb 21 21.11.14 13:14

1 2 ... 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments