Silvercrest SDTS 300 A1 User Manual download pdf (Page 44)

7. Operation

Switching on and off

• Press the ON/OFF 7 button briefly. The monitor 1 switches

on and shows the image of the area outside the door. After

approx. 30 seconds, the monitor switches off again, unless

you press the ON/OFF button first.

Setting the ringing volume

• There are 8 volume levels.

• Press the VOL 6 button until the required volume has been

reached. After the lowest level, the device starts again with

the loudest setting.

• Press the ON/OFF button to switch off the bell.

Setting the ring tone

• Your can choose between 16 different ring tones.

• Press the 4 button until the desired ring tone is heard.

Press the ON/OFF button to switch off the bell.

Visitor rings the door bell

When the visitor has pressed the door bell 11 below the lens 9,

the following occurs:

- The door bell rings and the monitor switches on.

- After approx. 30 seconds, the monitor switches off and the

ringing stops. Then the door bell can be pressed again.

• If the monitor 1 is switched off before you have reached the

door, press the ON/OFF 7 button to switch it on again. The

monitor switches on for approx. 30 seconds and allows a

view of the area outside the door.

__DT73358.BOOK Seite 42 Freitag, 25. Mai 2012 4:30 16

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 69 70

No comments

Silvercrest SDTS 300 A1 User Manual Page 44