Silvercrest SNMD 33 A1 User Manual download pdf (Page 90)

Always remove the power plug from the socket

when not using the sewing machine. Use the

dust cover (q) provided. Store the sewing

machine in a dry location which children cannot

access. If the sewing machine is not used for an

extended period, it should be protected from

excessive dust, dirt or moisture.

GB / IE

Important:

Removing the stitch plate (A):

Cleaning the feed dog (B):

Cleaning and lubricating the catch (C-G):

Important:

Disconnect the machine from the electricity

supply by removing the plug from the mains

socket. When cleaning the machine, it must

always be disconnected from the electricity

supply.

Turn the handwheel (21) until the needle is fully

raised. Open the hinged front cover and remove

the stitch plate screws with the L-screwdriver (k).

Remove the bobbin case and use the brush (n)

supplied to clean the whole area.

Remove the bobbin case. Snap the two catch

retaining arms (C) outwards. Remove the shuttle

race cover (D) and the catch (E) and clean with a

soft cloth. Lubricate at the points indicated (F) (1-

2 drops) using sewing machine oil. Turn the

handwheel until the shuttle race (G) is in the left

position. Replace the catch (E). Replace the

shuttle race cover and snap back the two catch

retaining arms. Insert the bobbin case and

bobbin and replace the stitch plate.

Fabric fluff and threads must be removed

regularly.

Maintenance

Storage

1 2 ... 85 86 87 88 89 90 91 92 93 94

No comments

Silvercrest SNMD 33 A1 User Manual Page 90