Silvercrest SNM 33 A1 Service Manual download pdf (Page 11)

6

The presser foot pressure of the machine

has been pre-set and requires no particular

readjustment according to the type of fabric

(light-or-heavy weight).

However, if you need to adjust the presser

foot pressure, turn the presser adjusting

screw with a coin.

For sewing very thin fabric, loosen the

pressure by turning the screw counter

clockwise, and for heavy fabric, tighten by

turning it clockwise.

Adjust presser foot pressure

Attaching the presser foot holder

Attention:

2. Attaching the presser foot

3. Removing the presser foot

4. Attaching the edge/ quilting guide

Turn power switch to off ("O") when

carrying out any of the above

operations!

1. Raise the presser bar (a) with the

presser foot lifter. Attach the presser

foot holder (b) as illustrated.

Lower the presser foot holder (b) using

the presser foot lifter, until the cut-out

(c) is directly above the pin (d)

The presser foot (f) will engage

automatically.

Raise the presser foot using the

presser foot lifter.

Raise the lever (e) and the foot

disengages.

Attach the edge/ quilting guide (g) in

the slot as illustrated.

Adjust as needed for hems, pleats,

quilting, etc.

Silver Crest SNM 33 A1

c

d

e

f

e

g

b

a

12

3

4

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments