Silvercrest KH 2029 User Manual download pdf (Page 7)

- 5 -

Starting up

Unpack the device

Remove all packaging materials.

Caution!

Do not let children play with the plastic film.

There is a risk of suffocation.

Check package contents

When unpacking, ensure that the following parts

are included:

• world receiver

• these operating instructions with warranty card

Mains and battery operation

When you disconnect the radio from the mains

supply, any settings you may have made (time,

alarm, stations in memory) will be lost. If you wish

to keep these settings, insert batteries (see below)

before disconnecting.

Inserting batteries

Instead of using the mains adapter, you can run the

radio from batteries (not supplied). You will need

four 1.5 V mignon batteries, size AA, LR6.

• Open the battery compartment on the rear of

the device by sliding the cover downwards.

• Insert four batteries into the compartment,

paying attention to the polarity.

• Replace the cover on the battery compartment.

If the batteries are too weak, this is indicated on the

screen by a flashing symbol .

Mains connection

• Connect the plug of the mains adapter

to the

DC INPUT 7.5 V socket on the side of the

device.

• Plug the mains adapter into an easily accessi-

ble socket. To avoid tripping hazards, please

avoid using an extension cable.

Caution!

Only use an adapter with an output voltage of

7.5 V / 400 mA and check the polarity of the

device’s plug ( ). The use of adap-

ters with a different output voltage may result in

damage to the device or mains adapter.

Automatic time update

• As soon as the mains adapter is connected or

batteries inserted, the world receiver starts in

time mode. The screen repeatedly shows

PLEASE WAIT SYSTEM SETTING.

If an RDS signal is received, the time and date

are set automatically. The correct time will then

be shown on the screen.

If the time is not correct, set the date and time

manually as shown below.

Connecting headphones

On the left side of the radio, you will find the

headphone socket.

• Insert the headphone jack plug into the

headphone output.

The speaker will be deactivated automatically.

Caution!

Listening to music with headphones

over long periods of time and at a high

volume may damage your hearing!

IB_KH2029_AR23586_LB3C 18.08.2008 15:56 Uhr Seite 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Comments to this Manuals

No comments

Silvercrest KH 2029 User Manual Page 7

Comments to this Manuals

Related products and manuals for Radio Silvercrest KH 2029