Silvercrest SKES 2 A1 User Manual download pdf (Page 60)

SKES 2 A1

♦ Connect the VIDEO OUTPUT socket to the video input of a television to

allow the singer(s) to read the song lyrics.

♦ Connect the AUDIO OUTPUT sockets of the device (L = left channel , R =

right channel

) either to the audio input of the television or a special ampli-

ﬁ er system (Hi-Fi system, PA, or similar). Using an ampliﬁ er system is sure

to produce a better sound quality. If the television only has a SCART input,

you can use the supplied SCART/cinch adapter “IN”

. Use the coloured

markings on the adapter and cable connections as an orientation aid.

♦ Connect the supplied microphones to the inputs MIC1 and MIC2 .

Their signals correspond to the left

and right audio outputs.

Electrical connection

■ Before you connect the device, compare the connection data (voltage and

frequency) on the mains adapter nameplate with that of the intended

power source. This data must agree in order to avoid damaging the product.

■ Make sure that the mains adapter connection cable is not damaged and

is not routed over hot surfaces and/or sharp edges.

■ Insert the connection cable plug into the power supply at the rear of the

device. Ensure that the power cable is not stretched tightly or kinked.

■ Do not allow the cable to dangle over edges (trip wire eﬀ ect).

■ Do not place the device, furniture or any other objects on the cable. Do not

kink the cable or knot it and do not connect it to other cables. Never wrap

the cable tightly around other objects otherwise the conductors inside the

cable could break and cause a malfunction.

IB_101513_SKES2A1_LB5.indb 57 29.07.14 16:12

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 82 83

No comments

Silvercrest SKES 2 A1 User Manual Page 60