Silvercrest SZP 25 B1 User Manual download pdf (Page 8)

6

GB

3. As soon as you stop pressing on the

juicer cone2/3, the device stops.

4. If the juicer cone2/3 is not turning,

check if there are pips between the juic-

er cone and the screen4/5 and re-

move them, if necessary.

5.3 Removing the juice

CAUTION: pull out the mains plug9 be-

fore removing the juice container7 from the

base10.

1. Figure B: turn the juice container7

counterclockwise and lift it from the

base10.

2. Pour the juice out of the juice container

7

.

3. In order to remove pulp and pips, you

can remove the screens4/5 and the

juicer cone2/3 together with the juice

container7.

4. Clean the device after each use as soon

as possible so the pulp does not start

drying to the surface.

6. Cleaning

Clean the device prior to its first use!

DANGER! Risk of electric

shock!

• Pull out the mains plug9 from the wall

socket before cleaning the citrus press.

• The base

10, the power cable and the

mains plug9 must

not be immersed in

water or any other liquids.

WARNING!

• Do not clean the citrus press or any of

its accessories in the dishwasher or with

boiling hot water.

• Do not use any astringent or abrasive

cleaning agents.

NOTE: clean the device after each use as

soon as possible so the pulp does not start

drying to the surface.

1. Remove the lid1, if necessary.

2. Remove the juicer cones2/3 and disas-

semble them.

3. Remove the screens4/5.

4. Figure A: in order to disassemble the

screens4/5, exert slight pressure on

the screen opener6.

5. Figure B: turn the juice container7

counterclockwise and lift it from the

base10.

6. Wipe the base10 with a damp cloth.

7. Wash up all removable accessories by

hand. Make sure to wash the small cavi-

ty in the handle with a sufficient amount

of clear water.

8. Dry all parts carefully, before reassem-

bling the device and storing it.

7. Storage

1. You can wind up the power cable9 in

the cable wrap11.

2. Place the lid1 on the device as a pro-

tection against dust. Ensure that the re-

cess in the edge of the lid is above the

handle.

8. Disposal

The symbol showing a wheel-

ie bin crossed through indi-

cates that the product requires

separate refuse collection in

the European Union. This ap-

plies to the product and all ac-

cessories marked with this

symbol. Products identified with this symbol

may not be discarded with normal house-

hold waste, but must be taken to a collection

point for recycling electric and electronic ap-

pliances. Recycling helps to reduce the con-

sumption of raw materials and protect the

environment.

__RP77146_B3.book Seite 6 Freitag, 21. September 2012 1:55 13

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 45 46

Comments to this Manuals

No comments