Silvercrest SKM 350 A1 User Manual download pdf (Page 54)

52

GB

8. Cleaning

Clean the device prior to its first use!

DANGER! Risk of electric

shock!

~ Pull the mains plug14 out the wall

socket before cleaning the food proces-

sor.

~ The motor block15, the power cable

and the mains plug14 must not be im-

mersed in water or any other liquids.

DANGER! Risk of injury from

cutting!

When washing manually, the water should

be sufficiently clear that you can see the

blades4,5 and8 easily.

WARNING! Risk of material damage!

Do not use any astringent or abrasive clean-

ing agents.

Dismantling the device

1. Pull out the mains plug14.

2. Turn the bowl11 anti-clockwise, until

the symbol 16 points to the bottom

marking on the bowl12.

3. Hold the bowl11 tightly. Turn the lid3

anti-clockwise, until the symbol 2

points to the top marking on the

bowl10. Remove the lid.

4. Carefully remove the dough blade7,

the blade insert8 or the insert holder6

with attached slicing insert4 / grating

disk5. Remove the drive axle9.

5. Figure F: turn the insert holder6

around and hold it over a washable,

scratch-proof surface. Press the extending

edges of the slicing insert4 / grating

disk5 inwards and press it out.

How to clean properly

1. If necessary, wipe down the motor

block15 and the power cable14 with

a damp cloth. Ensure that the motor

block15 is completely dry before the

next time it is used.

2. All parts except for the motor block15

are dishwasher-safe up to 70 °C.

3. Allow all parts to dry completely before

you put them away or use the device

again.

Some cleaning tips

• Clean the device as soon as possible af-

ter use in order to prevent food rem-

nants from drying on.

• After processing very salty or acidic

foodstuffs, the dough blade7 / blade

insert8, the insert holder6 and the slic-

ing insert4 / grating disk5 should be

washed thoroughly and right away.

9. Storage

DANGER for children! Keep the

device out of the reach of children.

DANGER!

In order to avoid accidents, the

mains plug



14

must never be connected to a

wall socket while in storage.

• Assemble the food processor for stor-

age. This allows the blade insert



8 to be

stored safely.

• Select a location where neither high

temperatures nor moisture can affect the

device.

• Figure G: the power cable14 can be

wound up on the cable spool in the

housing cover of the motor block15.

__RP104067_B2.book Seite 52 Montag, 3. November 2014 11:26 11

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61 62

Comments to this Manuals

No comments