Silvercrest STV 45 C2 User Manual download pdf (Page 9)

7

Notes

–On delivery, screw ring 12 is screwed

onto the bottom of the tower fan.

– Ensure that power supply cable 9 is

located in the depression provided for it.

– Tighten screw ring 12 hand-tight. Do

not use a tool.

6. Select a location in line with the safety

instructions (see “4. Safety instructions”

on page 4).

7. Plug the power plug into a power supply

socket which meets the technical data

requirements.

6. Operation

6.1 Start and switch off the appliance

1. Plug the power plug into a power supply

socket which meets the technical data

requirements (see “3. Technical data”

on page 4).

2. Switch on the power

supply by turning rotary

switch 2 to "ON".

The appliance is now operational.

3. Switch off the power

supply by turning rotary

switch 2 to "OFF".

6.2 Set blower setting

The blower settings are used to select how

fast the appliance circulates air in the room.

The appliance has three blower settings:

– 1, low: press button 6;

– 2, moderate: press button 4;

– 3, high: press button 3.

Press the 7 "OFF" button to stop the

appliance working.

6.3 Set running time

The appliance has a timer which you can

use to set the desired running time to

between 0 and 120 minutes.

1. Switch on the timer by

turning rotary switch 2 to

any time between 0 and

120 minutes. The power

supply is switched on at

the same time.

2. To switch off the timer, set rotary

switch 2 to "OFF".

Note If you want the appliance to operate

continuously, set rotary switch 2 to "ON".

RP103879 Tower-Ventilator LB6so Seite 7 Mittwoch, 1. Oktober 2014 11:26 11

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Comments to this Manuals

No comments