Silvercrest H-3246 Operations Instructions download pdf (Page 11)

H-3246 9

9. Cleaning

9.1 Cleaning the Appliance

To ensure your product gives you lasting

service, you should clean it regularly.

Warning! To avoid the danger of

an electric shock:

• Remove the mains plug before cleaning.

• The operating/heating element 1 must

not under any circumstances be cleaned

under running water. Only clean it with

a damp cloth.

1. Remove the lid 12, frying basket 17 and

the operating/heating element 1.

2. Store the operating/heating element 1 in

a secure, dry place.

3. Remove the frying insert by the handles

8 and dispose of the oil or fat.

4. Clean the lid 12, frying basket 17,

frying insert 8 and casing 3 with a little

mild detergent in hot water.

5. Then rinse them with clean water and

dry them off carefully. Never use caustic

or abrasive cleaning agents or cleaning

materials such as scouring solution or

steel wool.

6. The lid 12, frying insert 8 and casing 3

can be washed in the dishwasher.

Note: The permanent ﬁlter 15 is not

dishwasher safe.

7. First replace the frying insert in the

stainless steel fryer by the handles 8,

then the operating/heating element 1

and lastly the frying basket 17.

8. Fold the handle 19 into the frying basket

17.

9. Roll up the mains cable and put it into

the cable compartment 6.

Note: You can easily transport the stainless

steel fryer by using the handles that are

ﬁtted on the sides.

10.Always store the stainless steel fryer so

that it is kept free of dust by ensuring

that the lid 12 is always put on.

9.2 Cleaning the Filter

In the lid 12 there is a permanent ﬁlter 15,

which should be cleaned after every use of

the deep-fat fryer.

1. Open the ﬁlter

cover 14.

2. Lift off the ﬁlter

cover 14.

3. Remove the per-

manent ﬁlter 15.

4. Carefully clean

the permanent ﬁlter 15 in the sink with a

mild detergent.

Note: The permanent ﬁlter 15 is not

dishwasher safe.

5. Replace the per-

manent ﬁlter 15.

RP46891-Fritteuse LB6 Seite 9 Donnerstag, 7. Januar 2010 5:34 17

1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments