Silvercrest SHBS 1000 A1 Service Manual download pdf (Page 20)

20 GB/IE

Cleaning and care / Disposal

j After cleaning, place the locating lug of the blade set

back

into the locating hole of the cutter head mount (see Fig. C).

j Re-engage the blade set

by applying a little light pressure from

the rear of the device (see Fig. D).

Tip: To reduce friction apply one or two drops of cutter oil (accessory)

from time to time between the blades and spread it out evenly. You

may also use any acid-free oil (such as sewing machine oil). Wipe

away any excess oil with a cloth.

Disposal

This hair and beard clipper contains two NiMH rechargea-

ble batteries.

The batteries should be discharged before disposal.

j Disconnect the device from the power supply.

j Switch the device on and allow it to continue to operate until it

switches itself oﬀ.

j Press the release button on the back of the device (bottom) to

remove the rechargeable batteries from the device (see Figs. E - G).

Now you can dispose of all the components in accordance with the

regulations.

You are not permitted to throw away single-use or recharge-

able batteries with household refuse. Please dispose of

single-use or rechargeable batteries through a battery

return system or a battery collection point run by your

dealer or local council.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

No comments

Silvercrest SHBS 1000 A1 Service Manual Page 20