Silvercrest SWK 2200 B2 User Manual download pdf (Page 10)

SWK 2200 B2

5) Fill the appliance with water once again, up to the MAX mark, and then

bring it to boil. When done, pour this water away also.

The appliance is now ready for use.

Boiling water

RISK - ELECTRIC SHOCK!

► NEVER place the electrical base 6 in close pro

ximity to water –Risk of

fatal electric shock!

WARNING - RISK OF INJURY!

► Always use fresh drinking water. Do not consume any water that has al-

ready stood in the k

ettle for longer than one hour. Do not reboil water that

has cooled down. Always pour old water away. It may contain germs!

NOTE

► Always ensure that the on/oﬀ switch 4 is in the "

" position when the

mains plug is unplugged and the appliance is standing on the base 6.

If not, the appliance could heat up unintentionally as soon as the mains

plug is plugged in again.

1) Remove the kettle 8 to ﬁ ll it!

2) Open the lid by pressing the release button 2 towards the handle and, at

the same time, lifting the lid upwards.

NOTE

► Hold the kettle 8 upright when ﬁ

lling it. This is the only way to read the

markings on the scale 3 correctly.

3) Fill the kettle 8...

– to at least the MIN mark, so that the appliance does not overheat,

– no further than the MAX mark, so that boiling water cannot spill out.

4) F

irst close the lid and then place the kettle 8 on the base 6, such that it

stands securely on the base 6.

5) Now insert the plug into the mains power socket.

6) Push the on/oﬀ switch 4 down into the position „I“. The appliance starts to

operate and the indicator lamp 5 lights up.

When the water is boiling, the appliance switches itself oﬀ automatically. The On/Oﬀ

switch 4 reverts automatically to the “

” position, the indicator lamp 5 switches oﬀ .

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

Silvercrest SWK 2200 B2 User Manual Page 10