Silvercrest SWKT 3000 B2 User Manual download pdf (Page 46)

SWKT 3000 B2

Boiling water

RISK - ELECTRICAL SHOCK!

► Never place the electrical base 3 close to w

ater – this would be a

potentially fatal risk!

WARNING - RISK OF INJURY!

► Always use freshly drawn water. Do not consume any water that has

alr

eady stood in the kettle for longer than one hour. Do not reboil water

that has cooled down. Always pour old water away. Microbes could have

formed in it!

NOTE

► Always ensure that the ON/OFF switch 2 is turned to “O” when the

mains plug is unplugged and the de

vice is standing on the base 3.

If not, the device could heat up unintendedly as soon as the mains plug is

plugged in again.

1) Lift the kettle oﬀ of the base when ﬁ lling it!

2) Press the unlocking button 1 and open the lid.

NOTE

► When ﬁ lling it, hold the kettle upright. This is the only way to read the

markings on the scale 6 corr

ectly.

3) Fill the kettle...

– to at least the MIN mark, so that the appliance does not overheat,

– to maximum the MAX mark, so that boiling water cannot spill out.

First close the lid, then place the kettle on the base 3, so that it sits securely

on the base 3.

5) Adjust the temperature regulator 5 to the required setting. To bring the

water to the boil, you have to set the temperature regulator 5 to the MAX

position in the boiling range (area marked red on temperature regulator 5).

6) Now insert the plug into the mains power socket.

7) Press the ON/OFF switch 2 downwards so that it engages.

8) The integrated indicator light in the ON/OFF switch 2 indicates that the

appliance is now heating up.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

No comments

Silvercrest SWKT 3000 B2 User Manual Page 46