Silvercrest SWKS 2400 C1 User Manual download pdf (Page 34)

SWKS 2400 C1

Boiling water

RISK - ELECTRICAL SHOCK!

►

Never place the electrical base 4 close to water – this would be a

potentially fatal risk!

WARNING - RISK OF INJURY!

► Always use freshly drawn water. Do not consume any water that has

already stood in the kettle for longer than one hour. Do not reboil water

that has cooled down. Always pour old water away. Microbes could have

formed in it!

NOTE

►

Always ensure that the ON/OFF switch 3 is turned to “0” when the mains

plug is unplugged and the device is standing on the base 4.

If not, the device could heat up unintendedly as soon as the mains plug is

plugged in again.

1) Lift the kettle oﬀ of the base when ﬁ lling it!

2) Press the unlocking button 1 and open the lid.

NOTE

►

When ﬁ lling it, hold the kettle upright. This is the only way to read the

markings on the scale 2 correctly.

3) Fill the kettle...

– at least as far as the 0.7 l mark, so that the appliance does not overheat,

– no further than the MAX mark, so that boiling water cannot spill out.

4) First close the lid, then place the kettle on the base 4, so that it sits securely

on the base 4.

5) Now insert the plug into the mains power socket.

6) Press the ON/OFF switch 3 downwards so that it engages.

WARNING - RISK OF INJURY!

► For safety reasons you should not open the lid when the water is boiling or

extremely hot. There is a risk of scalding.

7) The light in the ON/OFF switch 3 shows that the appliance is now heating.

8) As soon as the water is boiling, the appliance will switch itself oﬀ , the

ON/OFF switch 3 clicks upwards and the light goes out.

IB_93443_SWKS2400C1_LB2.indb 31IB_93443_SWKS2400C1_LB2.indb 31 02.09.13 11:0802.09.13 11:08

1 2 ... 29 30 31 32 33 34 35 36 37 38 39

No comments

Silvercrest SWKS 2400 C1 User Manual Page 34