Silvercrest SEM 1100 A1 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
9
Espresso Machine
GB
Heating up before every use
Before you can prepare an espresso or cappuccino, the appliance must be heated
up.
Switch the appliance on with the 1) on/off switch 3. The rotary switch 5 is at
the position „
“.
The red heating-up control lamp 2) i glows.
Wait until the green heating-up control lamp 3) 4 glows.
You can now make an espresso / cappuccino.
Heating up after an extended downtime
If you have not used it for some time, preheat the appliance as follows:
Fill the water tank 1) 1 with water.
Place either the large 2) q or the small espresso sieve 0 in the sieve carrier
w.
Insert the sieve carrier 3) w into the appliance by placing it at the marking
“INSERT” and then turning it anticlockwise to the marking “LOCK”.
Place a cup under the sieve carrier 4) w.
Close the steam regulation knob 5) 2 (turn it as far as it will go in the direction
“ - “).
Switch the appliance on with the on/off switch 6) 3.
The red heating-up control lamp 7) i glows.
Turn the rotary switch 8) 5 to the position “
”. The pump begins to pump water
into the appliance. As soon as water fl ows from the sieve carrier opening, turn
the rotary switch 5 back to the position “ ”.
As soon as the green heating-up control lamp 9) 4 glows, turn the rotary switch
5 to the position “
”. Allow the water to fl ow for about 1 minute. It may be
that you need to empty the cup in between. For this, briefl y stop the process.
After approx. 1 minute turn the rotary switch back to the position “10)
”.
Wait until the green heating-up control lamp 11) 4 glows again. The warming-up
is concluded. You can now prepare espresso.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 121 122

Comments to this Manuals

No comments