Silvercrest SPLK 200 A1 Instruction Manual download pdf (Page 54)

If you’ve connected your Zone 2 speakers to the AV

receiver, as explained in “Connecting Your Zone 2 Speak-

ers Directly to the AV receiver” (➔ 53), you must set the

“Front High/Zone2” setting to “Zone2”.

Main menu Speaker Setup

Note

• When “Zone2” is selected and Zone 2 turned on, the Zone 2

speakers connected to the FRONT HIGH OR ZONE 2

SPEAKERS terminals output sound, but the surround back or

front high speakers connected to the SURR BACK OR

FRONT HIGH SPEAKERS terminals do not. When “Zone2”

is selected and Zone 2 turned off, the surround back or front high

speakers output sound as normal.

• When the “Front High/Zone2” setting is set to “Zone2” and the

input selector of Zone 2 is selected, power consumption on

standby mode slightly increases.

This section explains how to turn Zone 2 on and off, how

to select an input source for Zone 2, and how to adjust the

volume for Zone 2.

Controlling Zone 2 from the AV receiver

Note

• While Powered Zone 2 is being used, listening modes that

require surround back and front high speakers (6.1/7.1), such as

Dolby Digital EX, DTS-ES, and Dolby Pro Logic IIz Height are

unavailable.

•When the “Front High/Zone2” setting is set to “Zone2” and the

input selector of Zone 2 is selected, power consumption on

standby mode slightly increases.

Setting the Powered Zone 2

In the “Speaker Setup” menu, select “Speaker

Settings”, and then press ENTER.

Use q/w to select “Front High/Zone2” and e/r to

select “Zone2”.

` Zone2:

Zone 2 speakers can be used (Powered Zone 2

enabled).

Using Zone 2

To turn on Zone 2 and select an input source, press

ZONE 2 followed by an input selector button

within 8 seconds.

Zone 2 turns on, the ZONE 2 indicator lights.

To select AM or FM, press the TUNER input selec-

tor button repeatedly.

To select the same source as that of the main room,

press ZONE 2 repeatedly until “Z2 Selector:

Source” appears on the display.

Note

• You cannot select different AM or FM radio stations for

your main room and Zone 2. The same FM/AM radio sta-

tion will be heard in each room.

To turn off Zone 2, press OFF.

OFF

ZONE 2

– /+

ZONE 2 indicator Input selector buttons

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 98 99

Comments to this Manuals

No comments

Silvercrest SPLK 200 A1 Instruction Manual Page 54

Comments to this Manuals