Silvercrest SPLK 200 A1 Instruction Manual download pdf (Page 49)

HDMI

■ Audio TV Out

` Off

The audio is not output from the HDMI output.

` On:

The audio is output from the HDMI output.

This preference determines whether the incoming audio

signal is output from the HDMI OUT. You may want to

turn this preference on if your TV is connected to the

HDMI OUT and you want to listen to the audio from a

connected component through your TV’s speakers. Nor-

mally, this should be set to “Off”.

Note

• Listening mode cannot be changed when this setting is set to

“On” and the input source is not HDMI.

•If

“On” is selected and the audio can be output from the TV, the

AV receiver will output no sound through its speakers. In this

case, “TV Sp On” appears on the display.

•When

“TV Control” is set to “On” (➔ 50), this setting is fixed

“Auto”.

• With some TVs and input signals, no sound may be output even

when this setting is set to

“On”.

•When the “Audio TV Out” setting is set to

“On”, or “TV Con-

trol” is set to

“On” (➔ 50) and you’re listening through your

TV’s speakers (➔ 19), if you turn up the AV receiver’s volume

control, the sound will be output by the AV receiver’s front left

and right speakers. To stop the AV receiver’s speakers producing

sound, change the settings, change your TV’s settings, or turn

down the AV receiver’s volume.

■ Lip Sync

` Disable

HDMI lip sync disabled.

` Enable:

HDMI lip sync enabled.

The AV receiver can be set to automatically correct any

delay between the video and the audio, based on the data

from the connected monitor.

Note

• This function works only if your HDMI-compatible TV supports

HDMI Lip Sync.

• You can check the amount of delay being applied by the HDMI

Lip Sync function on the A/V Sync screen.

■ HDMI Control (RIHD)

` Off

p disabled.

` On:

p enabled.

This function allows

p-compatible components

connected via HDMI to be controlled with the AV receiver

(➔ 72 to 73).

Note

• When set to “On” and close the menu, the name of connected

p-compatible components and “RIHD On” are dis-

played on the AV receiver.

“Search…” o “(name)” o “RIHD On”

When the AV receiver cannot receive the name of the compo-

nent, it is displayed as “Player*” or “Recorder*”, etc (“*”

means the number of two or more component).

When set to “Off” and close the menu, “RIHD Off” are dis-

played on the AV receiver.

“Disconnect” o “RIHD Off”

• When an p-compatible component is connected to the

AV receiver via the HDMI cable, the name of the connected

component is displayed on the AV receiver display. For example,

while you are watching TV broadcasting, if you operate a

Blu-ray Disc/DVD player (being powered on) by the remote

control of the AV receiver, the name of the Blu-ray Disc/DVD

player is displayed on the AV receiver.

•Set to

“Off” when a connected piece of equipment is not com-

patible or it is unclear whether the equipment is compatible or

not.

• If movement is unnatural when set to

“On”, change the setting

“Off”.

• Refer to the connected component’s instruction manual for

details.

• When the source equipment is connected with the u connec-

tion, it may malfunction if “HDMI Control (RIHD)” is set to

“On”.

■ Audio Return Channel

` Off:

Select “Off” if you don’t want to use audio return

channel (ARC) function.

` Auto

The audio signal from your TV tuner can be sent to

the HDMI OUT of the AV receiver.

Audio return channel (ARC) function enables an HDMI

(Audio Return Channel) capable TV to send the audio

stream to the HDMI OUT of the AV receiver. To use this

function, you must select the TV/CD input selector and

your TV must support ARC function.

Note

•The “Audio Return Channel” setting can be set only when the

“HDMI Control (RIHD)” setting is set to “On”.

• This setting is set to “Auto” automatically when the “HDMI

Control (RIHD)” is set to “On” first time.

■ Power Control

` Off:

Power Control disabled.

` On

Power Control enabled.

To link the power functions of p-compatible com-

ponents connected via HDMI, select “On”.

This setting is set to “On” automatically when the

“HDMI Control (RIHD)” is set to “On” first time.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 98 99

Comments to this Manuals

No comments

Silvercrest SPLK 200 A1 Instruction Manual Page 49

Comments to this Manuals