Silvercrest SMFB 2.1 A1 User Manual download pdf (Page 52)

SMFB 2.1 A1

Pairing/connecting/disconnecting hands-free set

and mobile phone

Before the hands-free set can be used it must be paired with a compatible

mobile telephone.

1) Check to make sure the mobile telephone is switched on.

2) Set the mobile telephone so that it scans for Bluetooth

devices. A detailed

description of how to do this is to be found in the operating instructions for

your mobile telephone.

3) Position the hands-free set (main unit) and the mobile telephone so that

they are no more than 1 metre apart.

4) Press and hold the multifunction button

until the control lamp

lights

up alternately red and blue and two short beeps are heard. The hands-free

set is now in pairing mode.

5) Select the “SILVERCREST” hands-free set from the list of available devices

on the mobile telephone.

6) Enter the preset pass code “0000” and conﬁ rm to pair the devices with

each other. The control lamp

ﬂ ashes blue every 5 seconds and the

main unit switches to standby mode.

NOTE

► It may not be necessary to enter the pass code for some mobile telephones.

ou can now use the hands-free set.

NOTE

► If pairing is not completed within 2 minutes, the main unit switches itself into

tandby mode. You will need to repeat all of the steps.

Once the mobile phone has been paired with the hands-free set, proceed as

follows to connect the devices again.

1) Activate the Bluetooth function on your mobile phone.

2) Select “SILVERCREST” from the list of available devices.

3) Press the multifunction button

button on the main unit.

4) Conﬁ rm the connection on your mobile phone.

IB_93846_SMFB2.1A1_LB5.indb 48IB_93846_SMFB2.1A1_LB5.indb 48 02.12.13 09:3002.12.13 09:30

145 mm x 205 mm

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 77 78

No comments

Silvercrest SMFB 2.1 A1 User Manual Page 52