Silvercrest STS 12 A1 User Manual download pdf (Page 58)

STS 12 A1

Select a suitable mounting location for the appliance:

― The TV Simulator may not be directly visible from outdoors.

― The ﬂ ickering generated by the TV simulator must be visible

on the walls and/or ceiling from outdoors.

― A power socket must be easily accessible.

― The TV Simulator must be installed such that it can be inﬂ uenced

by the twilight. This means that the fall of light from outside must

be given! Take note that when wall mounted, the twilight sen-

sor 8 is very close to the wall which aﬀ ects the fall of light.

― The TV Simulator may not be located near a window which

could be well lit from outdoors, such as on a busy street or

next to street lights.

― There should be no additional time-controlled light source in

the room, e.g. a night light.

♦ Remove the stand 5 by bending it slightly apart and then pull

the restraints out of the mountings.

♦ Drill two holes with a spacing of about 45 mm. Use the stand 5

to mark the holes: the spacing will thus be measured correctly.

The boreholes must be suitable for 8 mm wall plugs.

♦ Insert the supplied plugs into the holes and screw the stand 5

ﬁ rmly down through the holes for wall mounting 7 using the

supplied screws.

♦ Push the TV Simulator back onto the stand 5. Ensure that the

two cross-shaped restraints engage correctly with the mountings.

IB_78527_STS12A1_LB1.indb 55IB_78527_STS12A1_LB1.indb 55 16.10.12 11:2016.10.12 11:20

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64

No comments

Silvercrest STS 12 A1 User Manual Page 58