Silvercrest SL 65 T Operations Instructions download pdf (Page 6)

The second step

Switch on the Receiver. Please note that the Receiver is preprogrammed for the

most current satellites and their programs and you only need to select the

program numbers with the Receiver remote control:

Example

If you'd like to receive the satellite Astral 19° east, you must put your Receiver

on program position 1. The same also applies to other satellites as for example

Hotbird. If you want to align your dish on Hotbird, you must select a

preprogrammed program for Hotbird in your Receiver.

The third step

Align your dish on the desired satellite. There are several possibilities. The

easiest and cheapest solution is as follows:

Position yourself behind your dish and put the dish quite vertical. Pay

attention to the fact that the dish arm points due south.

Now turn your dish (while observing the TV set) slowly to the east (to your the

left), until the dish arm points exactly to the east. Thus you've turned around

by 90°.

With digital Satellite reception, the Receiver receives the broadcasting signal a

little bit delayed. Therefore turn the dish very slowly and wait at every position

for several seconds, until the Receiver indicates the signal strength on the

screen menu.

Move your dish about 1° east and wait. Gently move the dish so its arm moves

from pointing slightly downwards to pointing 10° upwards and observe the

signal indication. You repeat these steps until you receive the desired program

on your TV set.

Press the remote control buttons CHA CHv to make sure that the other channels

are being received.

If you have the desired satellite, optimize the adjustment of the dish until you

have a clean picture on all channels. You can see a display of the signal

strength and signal quality by pressing of the INFO key. Adjust the dish for

highest signal reading, then adjust the LNB "twist position" (skew) for highest

Signal Quality reading.

Last you tighten all screws carefully, so that the setting of your dish can't

change.

To activate the audible signal you press the INFO button then the 1 button.

Page 6

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

No comments

Silvercrest SL 65 T Operations Instructions Page 6