Silvercrest SWUB 85 A2 User Manual download pdf (Page 5)

9 GB

Important … / Safety system / Special characteristics / Preparations for use

· do not place any object, such as a case or a

washing basket on the electric underblanket

while it is switched on,

· do not place any source of heat, such as a

hot-water bottle or the like on the electric

underblanket while it is switched on.

Otherwise the electric underblanket could be

damaged.

Do not cover the control unit

and do not

place it on the electric underblanket when it is

in use. The electronic components in the electric

underblanket's control unit

cause the control

unit

to heat up slightly during operation.

Safety system

Note: The electric underblanket is ﬁtted with a

safety system. Its electronic sensor system prevents

the electric underblanket from overheating over its

full area by switching it oﬀ automatically in the event

of a fault. If the safety system switches the electric

underblanket oﬀ automatically due to a fault, then

the function indicator

on the control unit

ceases to illuminate, even if the electric underblanket

is switched on.

Please note that, for safety reasons, the electric

underblanket must not be used in the event of

a fault and must be sent to the service centre

address given below.

Special characteristics

This electric underblanket has been provided with an

especially soft and hygienic soft nonwoven fabric.

The ﬁbres on the top side (see Fig. B) of the electric

underblanket have been treated with silver particles.

This treatment strongly reduces formation of odours

and bacteria. The textiles used in this electric under-

blanket meet the high human ecological safety

requirements of the Öko-Tex Standard 100 as proven

in tests at the Hohenstein Research Institute. You

may wash the electric underblanket as described;

the silver particles will not wash out.

Preparations for use

Placing the electric

underblanket

Starting at the foot end, spread out the electric

underblanket (top, see Fig. B) over the mattress.

The plug-in connector

on the electric under-

blanket should be towards the head end

(see Fig. C).

Then place the bottom sheet as usual over

the electric underblanket, so that the electric

underblanket lies between the mattress and

the bottom sheet.

Ensure that the electric underblanket is com-

pletely ﬂat and that it does not become drawn

together or folded during use.

Switch the electric underblanket on approxi-

mately 30 minutes before going to bed and

cover it with the top sheet and other bedding.

By doing this you will keep all the heat in.

Switching on / oﬀ / Selecting

the temperature

First connect the control unit

to the electric

underblanket by plugging the two parts of the

plug-in connector

together (see Fig. D).

Switching on:

Using the temperature setting switch

on the

control unit

, set the temperature to setting

1, 2, 3, 4, 5 or 6 to switch on the electric under-

blanket. The function indicator

illuminates.

Switching off:

Using the temperature setting switch

on the

control unit

, set the temperature to setting 0

to switch oﬀ the electric underblanket. The

function indicator

ceases to illuminate.

Selecting the temperature:

This electric underblanket has a rapid heat-up

feature.

1 2 3 4 5 6 7 8 9 10 ... 47 48

Comments to this Manuals

No comments

Silvercrest SWUB 85 A2 User Manual Page 5

Comments to this Manuals

Related products and manuals for Radiators Silvercrest SWUB 85 A2