Silvercrest KH 2398 User Manual download pdf (Page 10)

- 8 -

6. Press the button MEM SET/AMS h once

again to conclude the saving. The display

ashes for 15 seconds, after that the sav-

ing is nalised.

Setting alarm times (Alarm 1–4)

You can programme four alarm times with

your kitchen radio.

Alarm function

Symbol in the display o

Acoustic signal

Radio

Switched o no symbol

1. In automatic mode, press one of the

ALARM buttons 1–4 r–u to select the

location for the to be programmed alarm

memory. In the display o the last set

alarm time and the symbol for the type of

alarm blink for 15 seconds.

2. Press the buttons UP/DOWN 1(/l

to set the desired alarm time.

3. Repeatedly press the ALARM button pre-

viously pressed until the desired alarm

function (see table above) is indicated in

the display o.

4. Repeatedly press the button TIMER g to

set the weekdays on which you require the

alarm function: You can select between

"workdays" (Mo, Tu, We, Th, Fr), "week-

ends" (Su, Sa) and "every day" (Su, Mo,

Tu, We, Th, Fr, Sa). Thereby, orientate

yourself on the weekday indicator in the

display o:

Mo = Monday

Tu = Tuesday

We = Wednesday

Th = Thursday

Fr = Friday

Sa = Saturday

Su = Sunday.

5. If you hold the button TIMER g pressed

down for 2 seconds, you can also,

through repeated brief pressing of the

TIMER g button, select a specic week-

day (e.g. only "We"). The selected setting

is indicated in the display o.

6. To return to the selection of workdays,

weekends or whole weeks, once again

hold the button TIMER g pressed down

for 2 seconds.

7. After 15 seconds the blinking in the dis-

play stops and your input is saved. The ap-

pliance then returns to automatic modus.

When the alarm signal sounds...

• and the alarm function "Radio" has been

selected, the radio plays for one hour at

a pre-dened alarm volume. To exit, press

one of the ALARM buttons 1–4 r–u.

• and the alarm function "Signaltones" has

been selected, the signal tone sounds for

10 minutes, with an increasing volume. To

exit, press one of the ALARM buttons 1–4

r–u.

Radio operation

For radio reception, completely unwind the

wire aerial e and, with the radio switched

on, determine the most favourable position-

ing for it.

Switching the radio on and off

1.

To switch the radio function on, press the

button ON/OFF 2). In the display o the

currently selected frequency is shown.

2.

Press the button ON/OFF 2) once again

to switch the radio o and return the ap-

pliance to the automatic modus.

Manual station selection

1.

Briey press the button UP 1( repeat-

edly to search for stations with a higher

frequency than the one shown in the dis-

play o.

2. Briey press the button DOWN l

repeatedly to search for stations with a

lower frequency than the one shown in

the display o.

BDA_KH 2398 - DT-49029_6_uk.indd 8 22.06.2010 17:28:47

1 2 ... 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments