Silvercrest SMZS 1600 A1 Service Manual download pdf (Page 13)

3 Operation

5. Set the nozzle switch to "carpet" or "hard floor" accord-

ing to the floor (Fig. 15) to be cleaned:

- Hard floor (Fig. 15/a)

Parquet, laminate, tiles, PVC, etc.

- Carpet (Fig. 15/b)

Short- and deep-pile carpets, rugs, etc.

6. When working with the vacuum cleaner, pull if after you

like a sleigh.

3.2 If anything has acci-

dentally caught in the

vacuum or been vacu-

umed up

If objects (such as curtains, etc) have caught in the

vacuum cleaner:

1. Sometimes it is sufficient to open the bypass vent

(Fig. 17), thus reducing the suction power.

2. Otherwise, switch off the cylinder vacuum cleaner with

the on/off switch (Fig. 18/1) and pull the plug from the

mains socket.

If you vacuum up objects by accident

1. Switch off the cylinder vacuum cleaner with the on/off

switch (Fig. 18/1) and pull the plug from the mains sock-

et.

2. Proceed as described in ZChapter 4.1, "Emptying the

dust container".

NOTE:

In normal situations the bypass vent (Fig. 16) must be

completely closed. With the bypass vent you can quickly

reduce the suction power, to release objects such as cur-

tains that have been sucked in.

NOTE:

Your vacuum cleaner is equipped with a safety switch to

prevent overheating. It automatically cuts off the power

supply if the motor is overheated. In this case switch off

the vacuum cleaner with the on/off switch and pull the

plug from the mains socket. Eliminate the cause of over-

heating (e.g. clogged suction paths). Wait for about

45 minutes. After the appliance has cooled off, you may

switch it on again.

66492_Silvercrest_Multicyclone-Bodenstaubsauger_SMZS_1600_A1__GB_GR.pdf 12 20.05.2011 09:37:03

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

No comments

Silvercrest SMZS 1600 A1 Service Manual Page 13