Silvercrest SAS 7.4 LI A1 Operations Instructions download pdf (Page 6)

- 4 -

Technical data

Power adapter 4

Input voltage /

- current: 100 - 240 V

, 50/60 Hz

200 mA

Output voltage/

- current: 9,6 V / 300 mA

Protection class: II /

Type designation: HD-096A030-UK

AApppplliiaannccee

Input voltage /

- current: 9.6 V / 300 mA

BBaatttteerriieess

Capacity: 1300 mAh

Batteries: 7,4 V

(2 x 3.7 V Lithium-Ion

Batteries)

Information about the batteries

1. This hand-held vacuum cleaner is powered by

rechargeable lithium-ion batteries.

Before using the cableless hand vacuum cleaner

for the first time, the batteries must be charged

for at least 24 hours.

2. The batteries reach their full capacity after a

charging period of 24 hours. For care of the bat-

teries we recommend the following: after the bat-

teries are charged, remove the power adapter

4 from the mains power socket. Reconnect the

power adapter 4 again with the mains power

socket when the suction power of the appliance

is noticeably weaker.

Installation of the wall holder

Mortal danger!

Ensure that there are no power cables or other con-

duits or pipes in the wall at the location where you

intend to bore the holes for the wall holder 3.

It would be a potentially fatal risk to bore into a

current carrying electric cable!

1. Place the barrel plug 5 of the power adapter 4

into the wall holder 3 as shown in the diagramme.

Secure the barrel plug 5 by turning it.

2. Select a suitable installation location for the wall

holder 3: It should present no problem with

taking the hand vacuum cleaner out of it and a

mains power socket for the power adapter 4

must be accessible.

3. Bore two holes with a spacing of approx. 68 mm.

Use the wall holder 3 to mark the boreholes:

this will ensure the spacing is correct. The bore-

holes must be suitable for 5 mm wallplugs.

4. Insert the wallplugs into the boreholes and, using the

screws, firmly screw the wall holder 3 to the wall.

5. You can place the nozzles on the lateral acces-

sories holder.

6. Connect the power adapter 4 to a mains power

socket.

IB_73540_SAS7.4LIA1_LB6 05.04.2012 12:23 Uhr Seite 4

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Comments to this Manuals

No comments

Silvercrest SAS 7.4 LI A1 Operations Instructions Page 6

Comments to this Manuals