Silvercrest SZP 25 B1 User Manual download pdf (Page 8)

6

GB

juicer cone

2

/

3

starts turning, and the

juice flows into the juice container

7

.

3. As soon as you stop pressing on the

juicer cone2/3, the device stops.

4. If the juicer cone2/3 is not turning,

check if there are pips between the juic-

er cone and the screen4/5 and re-

move them, if necessary.

6.3 Removing the juice

CAUTION: pull out the mains plug11 be-

fore removing the juice container7 from the

base9.

1. Figure B: turn the juice container7

counterclockwise and lift it from the

base9.

2. Pour the juice out of the juice container

7

.

3. In order to remove pulp and pips, you

can remove the screens4/5 and the

juicer cone2/3 together with the juice

container7.

4. Clean the device after each use as soon

as possible so the pulp does not start

drying to the surface.

7. Cleaning

Clean the device prior to its first use!

DANGER! Risk of electric

shock!

• Pull out the mains plug11 from the wall

socket before cleaning the citrus press.

• The base

9, the power cable and the

mains plug11 must

not be immersed in

water or any other liquids.

WARNING!

• Do not clean the citrus press or any of

its accessories in the dishwasher or with

boiling hot water.

• Do not use any astringent or abrasive

cleaning agents.

NOTE: clean the device after each use as

soon as possible so the pulp does not start

drying to the surface.

1. Remove the lid1, if necessary.

2. Remove the juicer cones2/3 and disas-

semble them.

3. Remove the screens4/5.

4. Figure A: in order to disassemble the

screens4/5, exert slight pressure on

the screen opener6.

5. Figure B: turn the juice container7

counterclockwise and lift it from the

base9.

6. Wipe the base9 with a damp cloth.

7. Wash up all removable accessories by

hand. Make sure to wash the small cavi-

ty in the handle with a sufficient amount

of clear water.

8. Dry all parts carefully, before reassem-

bling the device and storing it.

8. Storage

1. You can wind up the power cable

11

in

the cable wrap

10

. Secure the power ca-

ble behind the mains plug with clamp

10

.

2. Place the lid1 on the device as a pro-

tection against dust. Ensure that the re-

cess in the edge of the lid is above the

handle.

9. Disposal

The symbol showing a wheelie

bin crossed through indicates

that the product requires sepa-

rate refuse collection in the Eu-

ropean Union. This applies to

the product and all accessories

marked with this symbol. Prod-

ucts identified with this symbol may not be dis-

carded with normal household waste, but

must be taken to a collection point for recy-

cling electric and electronic appliances. Recy-

cling helps to reduce the consumption of raw

materials and protect the environment.

__RP96254_B6.book Seite 6 Mittwoch, 27. November 2013 1:36 13

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Comments to this Manuals

No comments