Silvercrest SKD 1000 A1 Service Manual download pdf (Page 7)

6

3.8 Material damage

Caution! To avoid material damage, please

observe the following conditions.

• Remove the batteries from the remote

control if you are not using it for a pro-

longed period of time. Leaking batteries

could damage the remote control.

• Ensure that the feet are ﬁtted correctly

(see “4.2 Setting up the appliance” on

page 6), otherwise the ﬂoor might be

scratched or scorched.

4. Unpacking, setting up and inserting the batteries

4.1 Mounting the appliance

Before the appliance can be used, the feet 7

must be screwed on as follows:

1. Unpack the appliance from the

packaging.

2. Remove the transport packaging.

3. Check that the appliance shows no signs

of damage.

4. Insert the hooks on the feet into the cor-

responding openings on the bottom of

the appliance:

5. Slide the feet to one side to allow the

hooks to engage.

6. Secure the feet ﬁrmly using the supplied

screws:

4.2 Setting up the appliance

Note: As the appliance and heating ele-

ments are supplied with a thin ﬁlm of gre-

ase, there might be a small amount of

smoke and odour the ﬁrst time the appliance

is used. This is not harmful and will stop

after a short while. Please ensure meanwhile

that there is sufﬁcient ventilation.

Warning! Ensure that there is sufﬁ-

cient distance from the wall, ﬁxtu-

res and other appliances. The

distance must be at least 1 m to

exclude the risk of ﬁre.

1. Select a location in compliance with the

safety information (see “3. Safety infor-

mation” on page 3).

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Comments to this Manuals

No comments