Silvercrest SKAT 1000 EDS A1 User Manual download pdf (Page 31)

- 28 -

• Wait for approx. 15 seconds. The indicator

CLOCK disappears from the display 8.

The time display is now programmed.

• Press the button PROG 6 twice, so that only the

time is to be seen in the display 8. The time

display is now programmed.

Note:

If the coffee machine is separated from mains power

(or subject to a short power failure), the programmed

time is saved for a maximum of 15 seconds. In the

event of a longer separation from mains power, the

time must be reprogrammed.

Making coffee

Avoid brewing less than 4 cups of coffee. Otherwise,

the coffee will not have the desired temperature

and strength.

• Open the lid 1 and insert a filter bag (Size 1x4)

with folded over sides into the filter holder 2.

Using the measuring spoon w place coffee

powder into the filter bag. Subject to taste, you

will require approx one level measuring spoon w

of coffee powder per cup. A level measuring

spoon w approximates to about 5,5 gr of coffee

powder.

• Fill the water tank 3 with the required amount

of water. For this, use the scale 9.

Never fill the appliance with water beyond the

max-marking (12 cups).

• Close the lid 1, ensuring that it engages.

• Place the glass carafe q in the coffee machine.

• Press the button ON/AUTO/OFF 7 to start the

brewing process. The red indicator lamp integrated

into the ON/AUTO/OFF button 7 glows.

• When the brewing process is finished you can

remove the glass carafe q and serve the coffee.

If you do not wish to serve the coffee immediately,

allow it to stand in the coffee machine.

The keep-warm plate 0 will keep the coffee

warm for 60 minutes. After 60 minutes the coffee

machine switches itself off automatically.

• If you wish to switch the coffee machine off

manually, press the button ON/AUTO/OFF 7

twice so that the integrated blue indicator lamp

glows constantly. After approx. 15 seconds this

extinguishes. The coffee machine is now

switched off.

Note:

Allow the coffee machine to cool down for approx.

5 minutes before commencing a further brewing

process or filling it with water.

Timer-Function

By use of the button PROG 6 you can programme

the coffee machine so that it starts the brewing process

at a pre-determined time. First, ALWAYS place cof-

fee powder in the filter bag in the filter holder 2

and water into the water tank 3.Place the glass

carafe q in the coffee machine. Ensure that the

water tank 3 is not filled beyond the Max. marking

(12 cups).

• Press the button PROG 6 twice, so that TIMER

appears in the display 8.

• Programme in the desired start time with the button

HOUR 4 and the button MIN 5 (see chapter

"Setting the Time").

• When the desired start time has been programmed

in, press the button ON/AUTO/OFF 7 twice.

The integrated blue indicator lamp blinks and

indicates thereby that the Timer is programmed.

The coffee machine starts the brewing process

at the programmed time.

IB_86115_SKAT1000EDSA1_LB2 21.11.2012 12:02 Uhr Seite 28

1 2 ... 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments

Silvercrest SKAT 1000 EDS A1 User Manual Page 31

Comments to this Manuals

Related products and manuals for Coffee machines Silvercrest SKAT 1000 EDS A1