Silvercrest DV-767 User Manual download pdf (Page 49)

47

26 Trouble-Shooting

Problem Cause Solution

Battery not correctly inserted.

Insert the battery correctly (see

page 9).

Camera cannot be switched

on.

Battery not charged.

Use the mains supply or USB

cable to charge the battery (see

page 10).

The device switches on, but

then switches off again after

a short time.

The battery is not charged

sufficiently.

Use the mains supply or USB

cable to charge the battery (see

page 10).

The camera switches itself

off automatically.

A

uto Off is activated, and the

camera switches off automatically

after a predefined time.

Set Auto Off to meet your

requirements (see page 28).

The ambient temperature is too

low.

Do not use the video camera in

extreme temperatures.

The battery is overcharged.

If the battery only stays

charged for a very short time

after you have charged it, you

must replace the mains

adapter. To do this, contact the

customer hotline (see the back

of the manual).

The battery has exceeded its

lifetime.

Change the battery. To do this,

contact the customer hotline

(see the back of the manual).

The battery runs down too

quickly.

The device has been used too

often as a flashlight (this uses too

much power).

Only use the device seldom, in

order to save electricity.

The camera is not in Capture

mode.

Switch to Capture mode (see

page 11).

Delete data from your storage

medium or transfer data to your

PC (see page 39).

The camera does not take a

photo after the capture

button has been pressed.

The memory is full.

Insert an empty storage

medium into the device (see

page 12).

The lens is dirty.

Clean the lens with a soft, dry

cloth.

The Capture Distance switch is

not in its normal position.

Set the Capture Distance

switch

to its normal position.

The image is out of focus.

The quality is set too low.

Set the quality to “Super” (see

page 15).

The flash is not working. The flash is switched off.

Set the Flash mode to

“Automatic” (see page 19).

The date and time are not

displayed correctly.

The date and time have not been

set. The camera uses its standard

time.

Set the date and time (see

page 28).

1 2 ... 44 45 46 47 48 49 50

Comments to this Manuals

No comments