Silvercrest DV-767 User Manual download pdf (Page 21)

13 Taking Photographs

Switch the camera on and use the Capture / Playback switch to select Capture. Press the Mode

button

as often as necessary until the symbol for photo capture appears at the top left of the

LCD display

In the bottom right corner of the display (symbol

), you are shown how many photos you have

already captured, and how many remaining images are available in the current quality.

Press the Capture button

to take a photograph.

13.1 Zoom

When taking photographs, you can zoom in on (magnify) or zoom out from (reduce) your subject.

Push the Navigation button

in the following directions:

 c to zoom in (T stands for “telephoto”)

 d to zoom out (W stands for “wide angle”)

The right side of the display now shows a graphic, which allows you to find out to what degree you

are currently zooming.

To use the zoom function, the digital zoom must be activated. For more information see “Digital

Zoom“ hapter on page 30.

13.2 Capture Mode

If you are 30 – 40cm away from your subject, you will get a better result by using the

camera in Macro mode. To do this, move the switch

down to the Macro symbol. The

symbol

appears on the left of the camera display when the Macro mode is

activated.

For all other distances, move the switch up to the symbol for normal capture.

13.3 Flash

By pressing the Flash button more than once, you can select various options for the flash. The

following options are available (symbol

Flash off: the flash is switched off

utomatic flash: the camera uses the light conditions to decide whether or not a flash

is required.

Flash on: The flash is switched on, and is triggered at each capture.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

No comments

Silvercrest DV-767 User Manual Page 21