Silvercrest STYG 2000 A2 Operations Instructions Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
STYG 2000 A2 37
socket. Only then is the appliance
completely free of current.
If the appliance is connected to the mains it
may be damaged by lightning during
thunderstorms.
4.4 Protection against scalds and burns
Warning! Hot surfaces and boiling
fat can cause injuries. Please note
therefore:
The metallic surfaces of the appliance can
get hot. You should therefore only hold the
grill plate 6 by the handles 7.
Do not move the appliance when it is in use
and do not touch the housing or the grill
plate 6. These get very hot when the
appliance is in use. In this way you can avoid
injuries.
Use oven gloves when cooking food at a
high temperature. Splashed fat may
otherwise cause burns.
If possible, allow the fat in the drip tray 9 to
cool before removing it. Hot fat collects there
during grilling and cooking. If you need to
empty the drip tray 9 while grilling, pull it out
very carefully.
Always let the appliance cool down before
cleaning it or using it again.
If fat on the appliance catches fire, under
no circumstances use water to put it
out! There is danger of a deflagration or an
electric shock. Instead, cover the appliance
with a fire blanket or a large pan lid.
Never use the appliance near curtains and
other flammable materials. If the grilled food
catches fire, the flames could easily spread
to other objects.
4.5 For the safety of your child
Warning!
Children are often
unaware of danger and are injured as
a result. Please note therefore:
Only allow children to use this appliance
under the supervision of an adult.
Ensure the appliance is always kept out of
the reach of children.
Ensure that children cannot pull the
appliance down onto themselves with the
cable.
Ensure that the packing foil does not become
a deadly trap for a child. Packing foils are
not toys.
5. Before using for the first time
During manufacture, many parts are given a thin
film of protective oil. Before using the appliance
for the first time, heat it up without any food so
that any residues can evaporate.
Note: When heating up for the first few times a
slight smell may be produced. Make sure the
room is adequately ventilated.
1. Take the appliance and all the accessory
parts out of the packaging.
2. Check that the appliance shows no signs of
damage.
3. Remove any labels or stickers (but not the
type plate on the underside).
4. Clean the appliance before using it for the
first time. Observe the information in the
chapter entitled "Cleaning" on page 38.
5. Select a location that is firm, level and not
flammable. Maintain a distance of approx.
50 cm from other objects.
6. Turn the temperature regulator 3 to "0".
This switches the appliance off.
7. Plug the temperature regulator 3 into the
connecting socket 4.
R P73270 T eppan LB5 Seite 37 Mittwoch, 4. April 2012 1:35 13
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Comments to this Manuals

No comments