Silvercrest SFB 10.1 C3 Specifications download pdf (Page 108)

SilverCrest SFB 10.1 C3

106 - English

7. Enter the button commands sequence you want. Always start with the

device button of the device you want to record the macro for,

otherwise the message “ERROR KEY” appears.

8. By default, the different macro commands are transmitted

sequentially every second. As this could be too fast for some devices,

you can adjust the delay time in 2-second increments from 5 to 21

seconds.

9. To do this, press the button after a button command. Each press

of the button delays the pause time after the last command for 2

more seconds and the set value is shown on the display.

10. After you have finished entering the command sequence, press

. The display reads “SUCCESS”.

You can press up to 16 buttons per macro, including the device button.

After this, the macro is applied automatically and the display reads

“SUCCESS”.

Press to go back one menu level. To return to the start window,

press one of the device buttons.

Running a macro

1. Press the button.

2. Within the next 5 seconds, press the number button 1 to 6 which

corresponds to the macro you want.

3. The command sequence programmed for this macro is sent.

If you do not press the corresponding number button within 5 seconds

after you press the button or if you press a wrong button that has no

macro assigned, the remote control light flashes 4 times.

Deleting a macro

1. Press and hold the button for at least 3 seconds.

2. Press , select “MACRO” and press to confirm.

3. Press , select "MACRO1“ (or "MACRO2“…..

"MACRO6“ and press to confirm. The display reads “SET UP”.

4. Press , select “DELETE” and press to confirm. The

display reads “SURE DELET”.

5. Press to confirm. The display reads “DELETED”. The selected

macro is shown again on the display.

Press to go back one menu level. To return to the start window,

press one of the device buttons.

Configuring favourite channels (FAV CH)

This function is supported in the modes TV, DSAT, CBL and AUX (if the

AUX device button has been programmed accordingly) only You can

save preferred channels as favourites.

Setting up favourites

1. Press the device button for the device that you wish to program.

2. Press and hold the button for at least 3 seconds.

3. Press , select “FAV CH” and press to confirm.

4. Press , select “CONFIGURE” and press to confirm.

The display reads FAV-CH01.

5. Press , select “FAV-CH01” (or “FAV-CH02”….. “FAV-

CH15”) and press to confirm. The display reads “SELECT KEY”.

6. Enter the channel that you wish to save. You can save up to 6 entries

(digits or -/- -) per channel preset. The entered digits are not shown

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 114

Comments to this Manuals

No comments

Silvercrest SFB 10.1 C3 Specifications Page 108

Comments to this Manuals