Silvercrest SHU 3.1 B2 User Manual download pdf (Page 40)

SHU 3.1 B2

Using the HDMI changeover switch

♦ Switch your output device (e.g. television or beamer) on and

activate the HDMI input to which the HDMI changeover switch

is connected. To do this, follow the operating instructions for

the output device.

♦ Switch on the source device that you wish to use. The HDMI

changeover switch automatically changes over to the relevant

channel. The channel that has been selected (1, 2 or 3) is

indicated by the relevant channel LED

♦ Press SELECT

to select a channel manually. Each press of

the SELECT button switches the channel to the next switched-on

source device in descending order.

NOTE

►

If a source device is switched oﬀ , the HDMI changeover

switch automatically switches to the next source device that

is switched on in descending order

3 2 1

► Some source devices also output a signal on the HDMI output

when they are in standby. It is therefore possible that the auto-

matic changeover will not always take place. In this case a

manual changeover is required.

IB_85863_SHU3.1B2_LB2.indb 37IB_85863_SHU3.1B2_LB2.indb 37 03.01.13 12:1003.01.13 12:10

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46

No comments

Silvercrest SHU 3.1 B2 User Manual Page 40