Silvercrest SHU 3.1 A1 User Manual download pdf (Page 41)

SilverCrest SHU 3.1 A1 HDMI switch

English - 9

Using the HDMI switch

Switch on your output device (e.g. TV or digital projector) and

activate the HDMI input to which the HDMI switch was connected.

Please read the user manual of your output device.

Switch on the source device you wish to use. The HDMI switch then

automatically switches to the correct channel. The selected channel

is indicated by the LEDs H1 to H3 (5).

Press the Select button (3) to manually activate a channel. Each

time the Select button (3) is pressed, the HDMI switch goes to the

next active source device in descending order. The selected

channel is indicated by the LEDs H1 to H3 (5).

If one source device is switched off, the HDMI switch automatically

goes to the next active source device in descending order.

As some source devices also emit a signal on the

HDMI output when they are in standby mode,

automatic switchover is not always possible. In this

case switch the channel manually.

1 2 ... 36 37 38 39 40 41 42 43 44

No comments

Silvercrest SHU 3.1 A1 User Manual Page 41